BECK FW 80-16 Fine Wire Stapler
Wide crown, firm hold: the FW 80-16 drives BECK 80 and BECK 8 fine wire staples up to 16 mm (5/8”). With a crown of around 13 mm, these staples grip more material and hold covering fabrics, fleece and insulation securely in place. As part of the new FW generation, the tool features a new valve system with low air consumption, while the quick-release latch and metal cap make it ready for continuous use in upholstery and furniture making.
-
More hold in soft materials: wide staple crown
-
Reload with one finger: quick-release latch on the grip
-
Work safely with the integrated trigger lock
-
Built for continuous use: metal cap
Technical data
Applications
FAQs
The BECK FW 80-16 is a pneumatic stapler for wide crown 80 series fine wire staples up to 16 mm (5/8”). Typical applications are upholstery, furniture and bedding, automotive and insulation.
The tool drives BECK 80 and BECK 8 fine wire staples. They correspond to staple types such as BEA 80, ATRO 80, BOSTITCH 86, SENCO AT and PREBENA A.
Yes. The BEA 80 corresponds to the BECK 80, and the FW 80-16 drives it in lengths up to 16 mm (5/8”). BOSTITCH 86 and SENCO AT staples are comparable as well.
The BECK 80 has a 13 mm crown, much wider than the 9 mm of the BECK 7C. The wide crown grips more material and holds covering fabrics and fleece securely without cutting through them.
Both tools belong to the new FW generation for fine wire staples up to 16 mm (5/8”). The FW 80-16 drives staples with a crown of around 13 mm for more hold, the FW 7C-16 staples with a crown of around 9 mm for discreet fastening.
The tool operates at 4 to 7 bar (60 to 100 psi). Its new valve system responds quickly and uses little compressed air.
The FW 80-16 is bottom loading. The quick-release latch on the grip opens the magazine with one finger, and staples are inserted from below.
The FW 80-16 is a new development with a new valve system, a quick-release latch on the grip, a trigger lock and a metal cap. It drives the same staple types as the F1B 80-16.
